[{"name":"质量控制与失效分析","count":1869,"id":1},{"name":"Quality Control and Failure Analysis","count":1203,"id":2},{"name":"试验与研究","count":1068,"id":3},{"name":"Test and Investigation","count":683,"id":4},{"name":"试验技术与方法","count":564,"id":5},{"name":"Test Technique and Method","count":504,"id":6},{"name":"实验技术与方法","count":236,"id":7},{"name":"信息与动态","count":150,"id":8},{"name":"标准化","count":148,"id":9},{"name":"综述","count":142,"id":10},{"name":"Quality Control and Failure analysis","count":137,"id":11},{"name":"实践经验","count":118,"id":12},{"name":"专题讲座","count":79,"id":13},{"name":"Review","count":76,"id":14},{"name":"Standardization","count":76,"id":15},{"name":"Practical Experience","count":65,"id":16},{"name":"试验设备及应用","count":65,"id":17},{"name":"测试技术与方法","count":47,"id":18},{"name":"Special Report","count":46,"id":19},{"name":"专题报道","count":46,"id":20},{"name":"Special Subject","count":45,"id":21},{"name":"Test Equipment and Application","count":39,"id":22},{"name":"轴齿类","count":35,"id":23},{"name":"专题综述","count":30,"id":24},{"name":"管道·容器","count":30,"id":25},{"name":"实验室认可","count":29,"id":26},{"name":"Quality Control and Failure","count":22,"id":27},{"name":"其它","count":22,"id":28},{"name":"基础件","count":22,"id":29},{"name":"试验研究","count":21,"id":30},{"name":"Lecture on a Special Topic","count":20,"id":31},{"name":"实验室管理","count":20,"id":32},{"name":"Laboratory Management","count":17,"id":33},{"name":"人员培训与资格鉴定","count":17,"id":34},{"name":"Special Report(Fatigue Test and Fracture Test)","count":14,"id":35},{"name":"专题报道(疲劳试验和断裂试验)","count":14,"id":36},{"name":"标准化答疑解惑","count":14,"id":37},{"name":"国家重点实验室及行业检测中心","count":13,"id":38},{"name":"叶片","count":12,"id":39},{"name":"失效机理","count":12,"id":40},{"name":"Instrument Development","count":11,"id":41},{"name":"仪器研制","count":11,"id":42},{"name":"专题报道(硬度试验)","count":10,"id":43},{"name":"交流论文","count":10,"id":44},{"name":"知识之窗","count":10,"id":45},{"name":"Special Report (Tensile Test)","count":9,"id":46},{"name":"Special Report(Determination Methods of Metal Grain Size)","count":9,"id":47},{"name":"专题报道(拉伸试验)","count":9,"id":48},{"name":"专题报道(标准解析)","count":9,"id":49},{"name":"专题报道(金属晶粒度测定方法)","count":9,"id":50},{"name":"Laboratory Accreditation","count":8,"id":51},{"name":"Special Report (Hardness Test)","count":8,"id":52},{"name":"Special Report on Standardization and Testing Technology","count":8,"id":53},{"name":"专题报道(在线检测技术和检测设备)","count":8,"id":54},{"name":"标准化及检测技术专题报道","count":8,"id":55},{"name":"特邀报告","count":8,"id":56},{"name":"Special Report(Construction of Physical and Chemical Testing Laboratory)","count":7,"id":57},{"name":"专题报道(理化检验试验室建设)","count":7,"id":58},{"name":"表面分析技术专题讲座","count":7,"id":59},{"name":"计算机应用","count":7,"id":60},{"name":"Practial Experience","count":6,"id":61},{"name":"Special Report (Hardness Test and Tensile Test)","count":6,"id":62},{"name":"Special Report (Residual Stress)","count":6,"id":63},{"name":"Special Report (Revision Suggestions of GB/T 228.1—2010)","count":6,"id":64},{"name":"Special Report(Comparative Analysis of Metallographic Examination Methods)","count":6,"id":65},{"name":"Special Report(Metallographic Examination Method)","count":6,"id":66},{"name":"Technique Lecture","count":6,"id":67},{"name":"专题报道(GB/T 228.1—2010修订建议)","count":6,"id":68},{"name":"专题报道(残余应力)","count":6,"id":69},{"name":"专题报道(硬度试验与拉伸试验)","count":6,"id":70},{"name":"专题报道(试验机)","count":6,"id":71},{"name":"专题报道(金相检验方法)","count":6,"id":72},{"name":"专题报道(金相检验方法对比分析)","count":6,"id":73},{"name":"技术讲座","count":6,"id":74},{"name":"Other","count":5,"id":75},{"name":"Test Technioue and Method","count":5,"id":76},{"name":"试验室设备的升级改造","count":5,"id":77},{"name":"质量控制失效分析","count":5,"id":78},{"name":"Special Report (Test Method for Plastic Strain Ratio)","count":4,"id":79},{"name":"Special Report on Intelligent Laboratory Construction and Testing Technology","count":4,"id":80},{"name":"Special Report(Construction of Physical Testing and Chemical Analysis Laboratory)","count":4,"id":81},{"name":"Special Report(Laboratory Management)","count":4,"id":82},{"name":"Special Report(Revision Suggestions of GB/T 228.1-2010)","count":4,"id":83},{"name":"Test and Technique and Method","count":4,"id":84},{"name":"专题报告","count":4,"id":85},{"name":"专题报道(3D 打印)","count":4,"id":86},{"name":"专题报道(GB/T 228.1-2010修订建议)","count":4,"id":87},{"name":"专题报道(塑性应变比的检验方法)","count":4,"id":88},{"name":"专题报道(实验室管理)","count":4,"id":89},{"name":"专题报道(理化检验实验室建设)","count":4,"id":90},{"name":"其他","count":4,"id":91},{"name":"安全评估","count":4,"id":92},{"name":"征文","count":4,"id":93},{"name":"智能化实验室建设及检测技术专题报道","count":4,"id":94},{"name":"电子元器件","count":4,"id":95},{"name":"质量控制及失效分析","count":4,"id":96},{"name":"Quality control and Failure Analysis","count":3,"id":97},{"name":"Special Report (Residual Stress Measurement)","count":3,"id":98},{"name":"Special Report(Analysis on New Hardness Standards)","count":3,"id":99},{"name":"Special Report(Mechanical Test Technology Based on Optical Measurement)","count":3,"id":100},{"name":"专题报道(光测力学试验技术)","count":3,"id":101},{"name":"专题报道(在线检测)","count":3,"id":102},{"name":"专题报道(残余应力测定)","count":3,"id":103},{"name":"专题报道(硬度新标准解析)","count":3,"id":104},{"name":"医疗植入材料","count":3,"id":105},{"name":"失效分析","count":3,"id":106},{"name":"数据平台","count":3,"id":107},{"name":"组织与性能","count":3,"id":108},{"name":"院士论坛","count":3,"id":109},{"name":"Reviews","count":2,"id":110},{"name":"Special Report (Online Testing)","count":2,"id":111},{"name":"Special Report(Hardness Test)","count":2,"id":112},{"name":"Special Report(Testing Methods for Banded Structure of Steel)","count":2,"id":113},{"name":"Test and Investiaation","count":2,"id":114},{"name":"专题报道(钢的带状组织检验方法)","count":2,"id":115},{"name":"动态与信息","count":2,"id":116},{"name":"实验室认证","count":2,"id":117},{"name":"工艺·组织·性能","count":2,"id":118},{"name":"工艺组织性能","count":2,"id":119},{"name":"消息","count":2,"id":120},{"name":"知识窗","count":2,"id":121},{"name":"简讯","count":2,"id":122},{"name":"Computer Application","count":1,"id":123},{"name":"Intelligent Laboratory Construction","count":1,"id":124},{"name":"Special Report(Online Testing)","count":1,"id":125},{"name":"Special Report(Research and Verification on Testing Tensile Properties of Metal Material by Indentation Method)","count":1,"id":126},{"name":"《全国材料理化测试与产品质量控制学术研讨会》论文选登","count":1,"id":127},{"name":"专论","count":1,"id":128},{"name":"专题报道(金属材料压痕法测试拉伸性能的研究和验证工作)","count":1,"id":129},{"name":"争鸣","count":1,"id":130},{"name":"产践经验","count":1,"id":131},{"name":"人员培训与资格研究","count":1,"id":132},{"name":"人员培训与资格签定","count":1,"id":133},{"name":"仪器与设备","count":1,"id":134},{"name":"卷首语","count":1,"id":135},{"name":"学术会议","count":1,"id":136},{"name":"实验经验","count":1,"id":137},{"name":"展望","count":1,"id":138},{"name":"成分·组织·性能","count":1,"id":139},{"name":"无损检测","count":1,"id":140},{"name":"智慧实验室建设","count":1,"id":141},{"name":"测试技术","count":1,"id":142},{"name":"组织·性能","count":1,"id":143},{"name":"综 述","count":1,"id":144},{"name":"综术","count":1,"id":145},{"name":"计算机应用 ","count":1,"id":146},{"name":"设备与应用","count":1,"id":147},{"name":"评述","count":1,"id":148},{"name":"试验室设备","count":1,"id":149},{"name":"试验方法","count":1,"id":150},{"name":"试验设备与应用","count":1,"id":151},{"name":"试验设备的升级改造","count":1,"id":152},{"name":"质量检验与安全评估","count":1,"id":153},{"name":"述评","count":1,"id":154},{"name":"重点实验室及行业检测中心","count":1,"id":155}]
